F-gas regulations UK affect how air conditioning systems are installed, maintained and repaired. They are designed to reduce emissions from refrigerants that can contribute to global warming, placing responsibilities on equipment owners, operators and the contractors who work on these systems.
Further changes to the supply of some refrigerants are due in 2027. That does not mean every existing system will have to be replaced. It does mean owners should understand what refrigerant their equipment uses and keep its maintenance up to date. This guide explains the main points without getting lost in technical detail.
What Are F-Gases? Understanding F-Gas Regulations UK
F-Gases are fluorinated greenhouse gases used in a range of applications, including refrigeration, air conditioning and heat pumps. Many air conditioning systems use hydrofluorocarbons, or HFCs, as their refrigerant. The gas circulates around a sealed system, absorbing heat from indoors and releasing it outside.
These refrigerants are effective, but some have a high global warming potential. If they leak into the atmosphere, their impact on climate change can be much greater than the same amount of carbon dioxide.
F-Gas rules are intended to reduce emissions. They do this through controls on the supply of certain gases, restrictions on some new equipment and requirements for businesses that own, operate or work on relevant systems.
It is useful to distinguish modern F-Gases from older refrigerants such as R22. R22 was phased out under separate ozone-depleting substance rules. Current F-Gas measures focus on reducing the environmental impact of fluorinated refrigerants.
What Do F-Gas Regulations Mean for Air Conditioning Owners?
owns or operates equipment containing F-Gases, understanding F-Gas regulations UK is important. The requirements depend on the equipment and the type and quantity of refrigerant it contains.
The main responsibility is to prevent refrigerant escaping into the atmosphere. Equipment operators must arrange any required leak checks, take appropriate precautions and ensure that leaks are repaired as soon as possible. Simply adding more refrigerant without fixing the cause of a leak is not a suitable long-term solution.
Keeping accurate service records is also important. These should include details of the refrigerant, any gas added or recovered, leak-check results and repairs carried out. Where the regulations apply, records must generally be retained for at least five years by both the equipment operator and servicing company.
For facilities managers, keeping service reports together and checking maintenance requirements with their contractor is a sensible starting point. A clear service history also makes it easier to identify recurring faults and plan future maintenance.
When Does an Air Conditioning System Need an F-Gas Leak Check?
Not every system has the same leak-check requirements. The rules depend on the amount of refrigerant and its global warming potential. These are used to calculate the system’s carbon dioxide equivalent, usually shortened to CO₂e.
For equipment containing 5 tonnes of CO₂e or more, regular leak checks are generally required. The interval becomes shorter for larger quantities, and the largest systems have additional automatic leak-detection requirements.
The threshold can be reached with a relatively small amount of a refrigerant with a high global warming potential. For example, around 2.4kg of R410A is equivalent to 5 tonnes of CO₂e. This is why the refrigerant type matters as well as the size of the system.
If a leak is found, it must be repaired as soon as possible. Where the equipment is subject to the relevant leak-check rules, it must be checked again within one month after the repair to confirm that it has been effective.
A suitably qualified contractor can identify the refrigerant, establish whether checks are required and explain how often they should take place.
F-Gas leak checks are separate from TM44 air conditioning inspections. In England and Wales, systems with an effective rated output above 12kW generally need an energy inspection at intervals of no more than five years. TM44 looks at energy performance; it is not a refrigerant leak check.
Who Can Install, Service or Repair F-Gas Equipment?
Work involving refrigerants must be carried out by people with the appropriate qualifications. Companies carrying out relevant work on stationary equipment for other businesses must also hold the required company certification.
This can include installing equipment, maintaining or repairing a system, dealing with refrigerant leaks, recovering gas and decommissioning equipment. The exact certification depends on the work being undertaken.
Individual technician qualifications and company certification are separate requirements. A qualified engineer working for a business does not automatically mean that the business itself holds the necessary certification.
For property owners and facilities managers, the practical step is to use a contractor with the right credentials for the work. This helps ensure refrigerant is handled responsibly and records are maintained.
Work on the sealed refrigerant circuit should be left to appropriately qualified people with the correct equipment.
What Changes Under the F-Gas Phase-Down in 2027?
The UK has been reducing the amount of HFC refrigerant that can be placed on the market. This phasedown is designed to reduce reliance on gases with a high global warming potential and encourage the use of alternatives with a lower environmental impact.
For Great Britain, the existing quota schedule reduces the permitted HFC supply from 31% of the 2015–2019 baseline in 2024–2026 to 24% for 2027–2029, followed by 21% in 2030. These figures relate to the overall HFC quota, measured in carbon dioxide equivalent. They do not mean that an individual air conditioning system must reduce its refrigerant charge by the same percentage.
The supply of some higher-impact refrigerants will become more restricted, which may influence availability, costs and future equipment choices.
These quota figures apply to Great Britain. Northern Ireland follows a separate, EU-aligned F-Gas regulatory system, so the Great Britain percentages should not be presented as applying across the whole UK.
What Does This Mean for Existing R410A Systems?
Many businesses are concerned about R410A and whether the 2027 changes mean their existing equipment will become illegal. The quota reduction does not automatically ban existing R410A systems or require owners to replace them in 2027.
There is, however, a distinction between continuing to operate existing equipment and placing certain new equipment on the market. Since 1 January 2025, restrictions have applied to placing new single-split air conditioning systems containing less than 3kg of refrigerant with a global warming potential of 750 or more on the market. R410A is above that threshold.
That restriction is not a blanket ban on the continued operation or servicing of existing R410A systems.
If you have an existing R410A system, its age, condition, reliability and maintenance history all matter. A system that is working well and receiving appropriate maintenance may continue to provide useful service. If it develops repeated faults, loses refrigerant or becomes inefficient, it may be sensible to compare the likely cost of further repairs with replacement.
The right decision depends on the equipment and the needs of the building. Our guide to commercial air conditioning repairs or replacement looks at some of the factors businesses should consider.
How Can Businesses Prepare?
There is no need to replace every existing system simply because another stage of the phasedown is approaching. A few practical steps can help businesses understand their position and make informed decisions.
Start by checking which refrigerant the equipment uses. This information may be on the unit label or in its service records. If it is unclear, ask the maintenance contractor to identify it and explain which requirements apply.
Keep service reports and equipment records together. This makes it easier to see when the system was last checked, whether problems have occurred before and what work has been completed.
Do not ignore signs of a possible leak or a drop in performance. A refrigerant problem should be investigated by a suitably qualified contractor, rather than repeatedly topping up the system without addressing the cause.
It is also worth reviewing the condition of older equipment before a breakdown forces a rushed decision. Consider how reliably it operates, whether repairs are becoming more frequent and whether it remains suitable for the building. If replacement is likely in the next few years, discuss the available options and the refrigerant used by potential new systems.
Make sure anyone working on the refrigerant circuit has the appropriate qualifications and company certification.
Air Conditioning Servicing and Advice from Climate Environmental
F-Gas regulations are part of managing air conditioning equipment responsibly. Keeping records, arranging the required checks and dealing with faults promptly can help businesses look after their systems and avoid unnecessary refrigerant emissions.
The age, use and condition of the equipment all influence the most sensible approach to maintenance and future improvements.
Climate Environmental provides air conditioning services for businesses that need support with their equipment. If you are unsure about the condition of an existing installation or need help with ongoing maintenance, find out more about our air conditioning servicing and repairs.
Taking advice before a problem becomes urgent can help you plan maintenance and replacement decisions with greater confidence as refrigerant regulations continue to develop.

